The company has established the Henan Aluminum Powder Engineering Technology Research Center and the Xinxiang Fine Spherical Aluminum Powder Research Center. 36 people, accounting for 24% of the company's total number of employees, are directly or indirectly engaged in the research and development of new technologies and products. The company has a research base of 670 square meters and a pilot test base of 1300 square meters. It is equipped with complete R&D experimental equipment and analysis and testing equipment, such as: STM-1500 concentrated aluminum melting furnace, HDN-295-150 nitrogen generator, COXEM scanning electron microscope, Malvern 2000 laser particle size analyzer, Optima8000 inductively coupled plasma spectrometer, ON-3000 oxygen nitrogen analyzer, etc. The total value of the instruments and equipment is more than 9.87 million yuan, and it can carry out the production process research and pilot test of new products such as aluminum powder and aluminum-based alloy powder.

Instrument Name: ICP Spectrometer; Model: PerkinElmer Optima 8000

Instrument Introduction: It has the advantages of high sensitivity, good stability, small matrix effect, wide linear range, and simultaneous determination of multiple elements. It can analyze all metal elements in the periodic table, with a detection limit below 1 ppb. At the same time, it can analyze most non-metal elements, such as As, Se, P, S, Si, Te, etc., with a detection limit below 10 ppb.

Instrument Name: Benchtop Scanning Electron Microscope; Model: COXI EM EM-20

Instrument Introduction: Using advanced electron optical design, the SE imaging resolution reaches 7nm at 20KV, suitable for micro- and submicron scale morphology characterization. Standard configuration motor-driven sample stage, high-speed turbo molecular pump vacuum system. All functions can be automatically operated by NanoStation computer navigation. In addition to automatic functions, it also has manual adjustment functions, making the EM-20 have almost all the adjustment functions of large machines.

Instrument Name: Oxygen Nitrogen Analyzer; Model: Gangyan Nake ON-3000

Instrument Introduction: The oxygen-nitrogen analyzer can quickly and accurately measure the oxygen and nitrogen content in steel, rare earth materials, alloys, copper, zirconium, titanium, ceramics, powder materials, and other inorganic materials. This instrument has the advantages of high sensitivity, good performance, wide measurement range, and accurate and reliable analysis results.

Instrument Name: Wet Laser Particle Size Analyzer; Model: Mastersize 2000E

Instrument Introduction: The 2000E has a wide measurement range: measuring the particle size of substances from 0.1µm to 1000µm without changing the lens, and can accurately measure emulsions, suspensions, and dry powder substances. It has a series of semi-automatic sample dispersion devices, a "plug-and-play" box system, which can quickly switch between dispersion devices, and the software automatically identifies the dispersion device being used. It has high accuracy and instrument-to-instrument repeatability.

Instrument Name: Dry Laser Particle Size Analyzer; Model: SYMPATEC HELOS&RODOS

Instrument Introduction: SYMPATEC HELOS&RODOS does not require any dispersants or solvents; the testing accuracy is fast, and the analysis efficiency is high. It only takes a few seconds from sampling to results; the sample quantity can be from milligrams to kilograms each time; the uniquely designed self-cleaning dispersion system does not need to be disassembled and cleaned, and can continuously test many different materials without causing cross-contamination. The system automatically recycles waste, which is conducive to environmental protection and reuse.